Clear-Com to Show HME DX210 Intercom System AT AES 2011 Clear-Com will exhibit the new HME DX210 at this year's AES 2011, October 21-23, New York City (Booth #431). With two channels of communication, the product provides users with the option of a single- or dual-channel intercom system. In single-channel mode, up to four 1RU base stations can be linked together to support 16 full-duplex and 44 half-duplex belt packs and/or wireless headsets. The HME DX210 is also paired with BP210 belt packs and ll-in-One WH210 Wireless Headset COMMUNICATORs, which have two intercom buttons (IC1/IC2) with ISO. The advanced wireless system is also backwards compatible with the HME DX200 beltpacks, protecting the value of prior investments. The highly intuitive HME DX210 is easy to set up and use, facilitating faster turnaround times for enhanced productivity. Once the base station has been installed, it takes just a few simple steps to register and activate the DX210's BP210 beltpack and all-in-one WH210 wireless headset Communicators. The auxiliary in-jack supports ΒΌ" TSR or three-pin AES. Further, many of the DX210s most critical functions, such as audio adjust controls, are easily accessible from the front panel of the base station. "With many audio productions, fast and easy access to communications can make all the difference when it comes production value, so the HME DX210 was developed to offer sophisticated features that are simple to operate," says Craig Frederickson, product manager of the HME DX Series. "Besides this, many of its most important features are located on its front panel or on the BP210 belt pack and all-in-one WH210 Communicators. This way, busy audio professionals can access the features they need within a few seconds, adding greater efficiency to the overall production." The HME DX210 features the company's proprietary Spectrum-Friendly technology, enabling users to designate 2.4-GHz operating frequency ranges for effortless frequency coordination and interference-free communications. The system is purpose-built to be the most dependable wireless intercom available, selecting the strongest signal from two different antennas that are transmitting and receiving at separate times and frequencies. The company says the system seamlessly interfaces with two-wire and/or four-wire intercoms (if needed) and any auxiliary audio equipment. Its digital auto-nulling circuit eliminates audio feedback from the two-wire connections. With the addition of the DX210 to the existing HME DX wireless series, Clear-Com says it is now the only provider in the audio production space to offer the widest selection of basic, advanced, and expert level wireless intercom solutions, including the Tempest2400 2.4GHz and Tempest900 900MHz systems (available only in North America), CellCom 1.92-1.93GHz system and HME PRO850 UHF band system. At AES 2011, Clear-Com will demonstrate the HME DX210 along with its other products including the Tempest2400, Eclipse-PiCo matrix with V-series panels and the ConcertTM intercom-over-IP communications solution. 
|
