The Neutrik Group Introduces Next Generation XX Series Straight silentPLUG

	The NEUTRIK silentPLUG prevents pops, rattling, and squealing noises when plugging and unplugging instruments such as electric guitars and basses.

Neutrik's silentPLUG -- known for decades by guitarists, bass players, and sound professionals for its noiseless connection of instruments to amplifiers and other audio inputs -- enters its third generation with the new NP2XX-SILENT straight plugs.

The NEUTRIK silentPLUG prevents pops, rattling, and squealing noises when plugging and unplugging instruments such as electric guitars and basses. With its refreshed design, the new XX-series silentPLUG is easier to handle and better protected against impacts. The housing offers an upgraded design, which is shock resistant and slip proof, featuring soft grip zones in its two-component housing.

silentPLUG operates via a spring-loaded, retracting ring on the plug finger that connects to an internal reed switch. When the ring is in its forward position, with no instrument plugged in, the reed switch shorts the tip and sleeve contacts. In this mode, no signal passes, therefore avoiding the pops, hum, squeals, and other noises typically associated with plugging an instrument into an amplifier input. Once the plug is nearly completely inserted into the instrument's jack, the ring begins to retract, becoming fully retracted as the plug seats into the jack. At that point, the reed switch unshorts the tip and sleeve contacts, allowing signal to pass normally.

silentPLUG is as easy to assemble onto cables as any other Neutrik plug, the company says. Simply prepare the cable and then solder the center conductor and shield contacts.

Fred Morgenstern, VP technology for Neutrik Americas, comments, "silentPLUG is used widely on top international tours by the biggest stars as well as in countless hometown venues and studios. Electric guitarists and bassists, plus their sound engineers, appreciate how silentPLUG allows them to connect and disconnect their instruments noiselessly without having to hassle with muting their amplifiers and other inputs."

"The two-compound housing of the new XX series silentPLUG inherits the design language and technology of the XX series speakON 2- and 4-pole and powerCON blue/grey cable connectors. Its improved shock resistance and durability keep the plug's internal reed switch mechanism well protected. The new black-and-red color scheme continues the tradition of using red as a distinctive silentPLUG identifier while bringing the design forward into the 2020s."

NP2XX-SILENT is available for ordering now. The prior generation straight plug with the red rubber cover will be discontinued. For additional information, please contact Neutrik Americas at 704.972.3050.