WorxAudio Technologies Announces TrueLine XQ10 Extended Bass SystemWorxAudio Technologies, a manufacturer of loudspeaker systems for the pro touring and install markets and a division of PreSonus Audio Electronics, introduces the company's latest addition to its TrueLine family of products: the TrueLine XQ10 Extended Bass System. Designed to satisfy the requirements for extreme high SPL and extended low frequency performance, the new XQ10 delivers the transparent sonic quality and easy portability required by today's audio professionals. The TrueLine XQ10-P is designed to be used for low-mid frequency sections in multi-way loudspeaker systems, or as an extended bass section in any sound reinforcement setup requiring extended low frequency response with the highest quality audio reproduction. When used in large venue applications, the XQ10 is designed to be arrayed to increase performance. Further, the enclosure is built to truck pack dimensions for efficient transportation of multiple units. The XQ10 subwoofer is available in both touring and install configurations: XQ10i-P (install - powered), XQ10i-BA (install - biamped), XQ10T-P (touring - powered), XQ10 (passive). The powered versions include WorxAudio's PDA-2000 power amplifier, which is available with Dante and AVB audio networking options, onboard DSP, and WorxAudio's AllControl software integration. The PDA-2000A and PDA-2000D are 2,000W, four-channel amplifiers (500W per channel 1,000W peak) with internal DSP. The PDA-2000A includes the AVB card, while the PDA-2000D incorporates the Dante card. Networking provisions of the PDA-2000D include onboard EtherCON. The WorxAudio XQ10's transducer complement consists of four direct radiating, 10", 500W cone drivers with 2.5" voice coils in a tuned enclosure. This enclosure is made from highly braced, tour-tested, 15-ply Baltic Birch with 18mm thick baffle board construction that provides unsurpassed rigidity and strength. The TrueLine XQ10-P comes with a multi-layered Polyurea finish and is available in black or white. Install versions are also available in a natural wood finish. The loudspeaker system's protective grill is manufactured from 14-gauge (1.0mm) perforated steel with a black, powder-coated finish. The XQ10 provides two parallel-wired NL4 Neutrik speakON connectors along with Neutrik powerCON connectors for AC power, plus XLR M/F (in/out), and either Dante or AVB Networking connectivity. For suspension and mounting purposes, WorxAudio's TrueAim Tour side-plate rigging is available, along with optional array frame accessories. The XQ10's measurements are: 24.5" x 28" x 22.5" (width - depth - height). Weight varies by configuration. Hugh Sarvis, managing director of the PreSonus - WorxAudio loudspeaker division, commented on the company's new TrueLine XQ10 Extended Bass System, "The XQ10 is a very compact low mid/extended bass solution that augments our compact line arrays such as the WorxAudio X- and V-Series. The new enclosure adds that tight extended bass that compact line arrays are typically missing." The new WorxAudio TrueLine XQ10 Extended Bass System is available now. 
|
