PreSonus AVB-D16 Brings Dante Compatibility to StudioLive Series III EcosystemThe first plug-and-play endpoint that bridges AVB and Dante networks, the PreSonus AVB-D16 16x16 AVB-to-Dante Bridge enables users to send and receive up to 16 audio channels between PreSonus StudioLive Series III mixers and a Dante network. With one or more AVB-D16s, users can easily integrate PreSonus StudioLive Series III mixers, NSB-series stage boxes, and EarMix 16M personal monitor mixers with Dante-enabled DSPs and other Dante-enabled products, such as PreSonus CDL-12 constant directivity loudspeakers. The AVB-D16 supports AVB audio at 44.1 and 48kHz and Dante audio at 44.1, 48, 88.2, and 96kHz. Built-in asynchronous sample-rate conversion ensures that the AVB-D16 provides precision clock isolation between the AVB and Dante networks for pristine, clear audio with no dropouts or artifacts, the company says. This also allows users to run different sample rates on the AVB and Dante networks, so even if you're operating a Dante network at 96kHz, you can still connect streams between your StudioLive Series III AVB network operating at 48kHz with total confidence that the audio will be clean and error free. Users get one AVB port on a locking etherCON connector and two Dante ports on etherCON for redundant networking. Network Link/Activity Monitor indicators enable you to monitor the data flow. Whether you're looking at your Dante network setup from Audinate's Dante Control software or managing a StudioLive Series III AVB ecosystem from PreSonus UC Surface control software or a StudioLive Series III console touchscreen, each AVB-D16 presents itself as a simple 16x16 network device. The result is a truly cohesive networking experience between the two protocols.
|