Penn Elcom Launches New Low-Noise Fan

	Penn Elcom's FP02-Q-3U fan unit

Global flightcase and loudspeaker component manufacturer Penn Elcom launches a tough new low-noise 3U heat extraction unit which can be fitted to the front or back of any 19" racking unit to quickly, efficiently -- and silently -- suck the heat out of an enclosure.

This is great news for any environment (e.g. conference and presentation spaces, theatres, concert halls, lectures theatres, interactive AV displays, boardrooms and demonstration facilities, etc.) utilizing AV equipment -- where noise is a potential issue, distraction, or annoyance.

Penn's research and development team has pooled its vast experience and practical knowledge of the racking market and produced an ultimate and well-engineered solution.

The versatile FP02-Q-3U fan unit emits 22.5 dB(A) -- with a Sone (loudness) value of 0.3 -- and can be fitted to any existing 19" racking unit. At the top is the optimum position as the heat rises ... and will be extracted most efficiently.

The two nine-bladed fans measure 120mm, and each fan unit can be controlled by a CRC-temp thermal sensor accessory plugged into the temp socket on the front. This is set to operate at 40-degrees C and will re-set at 30-degrees C plus or minus 2-degrees.

Using a neat acrylic adhesive pad, the sensor can be attached to an area where it will best detect the overall ambient temperature of the equipment being cooled -- rather than directly to the main heat source.

The lifespan of the Swiss-designed fans has been further extended -- by at least five times that of a standard fan -- with the use of robust Japanese dual ball-bearing brushes and high precision lubricants, which facilitates continuous rotation 24/7 with no compromises.

Dust, smoke / fog, other detritus, high temperatures, and other contamination has less effect than when using standard bearings, so the product is super-reliable and ideal for "fit-and-forget" scenarios and installations.

A DC to DC link socket is provided allowing two or more FP02-Q-3U units to be linked together (for which a higher powered PSU must be used) and as standard it is supplied with a worldwide universal 500mA / 12V power supply to run both fans.

A washable dust filter is also available as an accessory.

The FP02-Q-3U is light in weight at 1.5Kgs and the fluid bearings have a two-year warranty.

As with all Penn Elcom products, it has been quality designed and built to last and withstand the harshest operating conditions, making it a cost-effective and sensible investment.