W-DMX Debuts New Products at LDIWireless Solution Sweden AB will unveil its three latest products at LDI2014, November 21 - 23 at the Las Vegas Convention Center in the A.C.T. Lighting booth 1715. The company says these innovative products will make Wireless DMX projects easier than ever before. New on display will be the W-DMX UglyBox MK2. This is a compact new wireless signal tester, which is a valuable tool for users of wireless products, providing proof of a solid signal and piece of mind in the absence of visible cable. The UglyBox MK2 is housed in an attractive compact body, resembling a gaming control with a 4.3" touch LCD screen. It supports 2.4GHz, 5.2GHz, and 5.8GHz and is a transceiver solution, which means that it can be used as both transmitter and receiver. It has a complete DMX tester that provides all data in live format directly on the screen. It also has a built in DMX controller as well as an RGB fixture to simulate LED fixtures on the LCD screen for quick testing. In history mode the user can also see over time that they have a stable signal over a certain period. The unit runs on a rechargeable Lithium battery for up to 12 hours and has a built-in SD card reader to save all data for later export to Microsoft Excel. The UglyBox MK2 is geared towards rental and installation companies but useful for anyone. The unit is also designed to update with additional features as they become available. Also on display is the new W-DMX COB (Chip on Board), a transceiver solution in an ultra compact 6x6mm size. Wireless Solution says it is the first to launch the SMT mounted Chip On Board Radio Transceiver that supports both DMX and RDM in a QFN48 package. The W-DMX COB is a low energy solution with only 40mA current consumption that facilitates distances up to 200m (650') with a standard antenna together with a BlackBox F-1MK2. W-DMX COB is a low cost solution, making it possible for every manufacturer to implement wireless DMX with support of RDM. The W-DMX Solution is fully updateable to W-DMX Generation 5, with unique adaptive frequency hopping to automatically avoid interference from other wireless networks, and a data-safe function with 128-bit encryption to avoid un-licensed use of W-DMX protocols. With Invisi-Wire, error correction and up four times wireless redundancy that re-sends the wireless data four times faster over the air compared to DMX protocols on different radio frequencies, it ensures the most stable wireless DMX/RDM solution on the market. Finally, the company says the new NANO RDM RX, is the next phase of Wireless RDM Receivers. As RDM functionality continues to increase in demand, Wireless Solution offers a new solution. The NANO RDM RX is a DMX/RDM Receiver with full implementation of the RDM protocol and support of the latest G4S software with updated 128-bit encryption and much improved adaptive frequency hopping algorithm that is improved by 200% more accurate reading of the interference noise level. Based on the same technology as the W-DMX COB solution with high power PA as well as a LNA with superior sensitivity for long distance control. The NANO RDM RX supports the latest standard of ETSI EN300 328 with the 2015 revision. For easy implementation, it uses the same form factor as the existing NANO Range as well as the same connector in all other W-DMX products. The advantage with this is that it fits both high-volume as well as project-driven installations with a low cost that was not previously possible. Cost savings through volume are passed on to the OEM. The full range of W-DMX products will be available, along with the friendly faces of Wireless Solution and A.C.T. Lighting, who can answer questions and help make the user's next Wireless DMX project a headache-free and cost effective success. See Wireless Solution Sweden and A.C.T Lighting at PLASA Focus: Orlando, February 17 - 18, 2015. 
|
