ADJ Introduces Innovative New Modular LED Par DesignADJ introduces its latest range of professional LED par fixtures, the MOD Series. Each of the four new models offers a different LED light-source, suitable for a wide variety of applications, but they all feature the same innovative modular casing design which takes LED par flexibility to a new level. These unique pars are "modular" in two different ways. First, the main body moves -- pulling the LEDs inside the casing -- so that a snoot can be quickly and easily created to eliminate side glare if required in a particular situation. Second, the black metal outside casing can easily be removed and replaced with a pearl white housing kit (sold separately). This means that production companies and rental houses can invest in just one set of LED pars but have the flexibility of using them in either white or black depending on the requirements of each event or project. Four fixtures make up the MOD Series, each with the same pioneering design but with a different configuration of LEDs. The entry-level MOD QA60 features four 15W four-in-one RGBA LEDs for a total power output of 60W. Offering a diverse palette of colors, this affordable fixture is ideal for a wide variety of stage, dancefloor, and architectural lighting duties. For larger venues and productions when increased brightness is required, the MOD QW100 boasts a total of seven 15W four-in-one RGBW LEDs creating a total power output of 105W. The use of a white LED element for this model in place of the amber featured on the QA60 allows for intense cool white washes of light to be created. Also offering a total power output of 105W, the MOD TW100 makes use of four-in-one CW/WW/WW/A LEDs to allow exacting control over the color temperature of white light washes, making this fixture ideal for stage illumination. As with all LED-powered fixtures, it generates much less wasted heat than traditional stage lighting that utilizes filament lamps. This helps to keep the temperature down on stage, making for a more comfortable experience for performers. Finally, at the top of the range is the MOD HEX100 which features seven 15W six-in-one RGBWA+UV LEDs allowing for an extended gamut of colors including both cool and warm white. The inclusion of the UV element also means that the fixture can create a classic "UV glow" effect when used alone as well as exciting UV-infused colors -- such as hot pinks, lime greens, and electric blues -- when combined with the other LED elements. All four models feature the same flexible scissor yoke which consists of two separate brackets held together by a pair of thumbscrews. These can either slide together and lock into place to create a single hanging bracket or slide apart to create a variable-angle floor stand. This makes the MOD Series pars flexible fixtures that can be used for venue up-lighting, stage down-lighting and many other applications. Each fixture is also supplied with three interchangeable frost filters. These can be used to expand the standard beam angle of 17-degrees up to 20-, 40-, or 60-degrees, as required. The lenses are quick and easy to fit, secured in place with four convenient thumbscrews (supplied), and mean that the same fixtures can be used to create narrow shafts or broad washes of light depending on the requirements of a given project. In addition, a set of black metal barn doors is also available as an optional extra, offering even more flexibility. A choice of six different operational modes make the MOD Series ideal for all kinds of lighting installations -- both permanent and temporary -- covering the whole spectrum from standalone operation to full DMX control. A 16-segment backlit LED display on the rear of each fixture makes mode selection simple, while 64 built-in color macros make it easy to select popular colors and hues. Multiple fixtures can also be linked together for synchronized master/slave operation and an IR sensor allows remote control using either the ADJ Airstream IR app or UC IR controller (sold separately), which provide alternatives to standard DMX control. The MOD Series pars are professional-caliber fixtures and feature both three-pin and five-pin XLR input and output sockets to allow easy integration into any DMX lighting system. Locking powerCON mains input and output connections are also included, allowing multiple fixtures to be connected to one power supply. Compact dimensions of 7" x 8" x 9.25" / 174 x 204 x 235mm (LxWxH) mean that the MOD Series pars will fit into small spaces, providing unobtrusive yet powerful illumination wherever it is required. And, with a weight of just 6lbs/2.6kg, the fixtures are ideal for one-off events and mobile lighting setups that need to be easily transported. "ADJ has a strong reputation for producing LED-powered pars which combine innovative design, excellent reliability, and fantastic value for money," enthused ADJ USA's national sales manager, Alfred Gonzales. "Now, with the MOD Series, we're pushing the boundaries even further. With a completely reimagined casing design, the MOD Series has been created to give lighting designers more flexibility and more power. By investing in the MOD Series, lighting professionals will not only have par fixtures that offer unrivalled versatility and brightness, but the unique option to purchase pearl while housing kits for a fraction of the cost of completely separate white-cased fixtures." The MOD QA60, MOD QW100, and MOD HEX100 are available from ADJ USA now and the MOD TW100 is due to begin shipping in April 2018. For more information on the ADJ MOD QA60, visit: http://www.adj.com/mod-qa60 For more information on the ADJ MOD QW100, visit: http://www.adj.com/mod-qw100 For more information on the ADJ MOD TW100, visit: http://www.adj.com/mod-tw100 For more information on the ADJ MOD HEX100, visit: http://www.adj.com/mod-hex100 Get a "First Look" at the MOD Series: https://www.youtube.com/watch?v=SjlziT7URIc MOD HEX100 Demo Video: https://www.youtube.com/watch?v=-X430bUWt50 
|
