Soundcraft Vi1 Digital Console Uses a Fiber-Based A/V System to Mix Anywhere in LA County's New Grand ParkOpened in 2012, Grand Park is a 12-acre oasis of lawns, courtyards, fountains, and plazas located in the heart of Los Angeles County. The new park is host to music, performances, and entertainment year-round, under the auspices of The Music Center, one of the world's largest premier arts destinations. Performances can be held in a number of Grand Park's multi-use stages, spaces, and lawns, thanks to a unique system of "media hydrants" connected by fiber optic cable and a Harman Soundcraft Vi1 digital live sound console that can be quickly moved into place to any location where it's needed. Matt Saltzman, Grand Park's event manager, noted that the entire park is wired with fiber optic cable, buried underground and running to media hydrants located throughout the park that are linked to the main control room. The media hydrants provide digital audio and video connections via a Riedel light pipe data network and are terminated with Cat 5e for audio, video, and control. The media hydrants are embedded in concrete and the connectors face outward horizontally for durability and waterproofing. The units are locked with a steel gate when not in use. "In planning the A/V system for Grand Park, the County wanted to ensure live music and entertainment would be accessible in the widest variety of areas throughout the park," said Saltzman. "They devised the underground fiber optic system to enable us to do this, rather than have to restrict performances to the stage area. However, to make this idea work we needed to be able to move the mixing console to each area. The Soundcraft Vi1's digital connectivity enables us to do that." With its compact footprint, the Vi1 is relatively easy to move from place to place -- and it's easy to connect the Vi1 to the audio system using a Soundcraft Compact Stagebox. The Vi1 connects to the Compact Stagebox using a single Cat 5e cable, and the output from the Stagebox is then plugged into a media hydrant via Cat 5e. Saltzman notes that this arrangement eliminates the need for anywhere from 15 to 30 XLR cables. In some instances, Saltzman doesn't even have to move the board -- he or one of his staff will use an iPad to control front-of-house mixing from a remote location. The Vi1's built-in processing, reverb, compression, and comprehensive EQ and effects eliminate the need for outboard effects racks, further adding to the mobility of the setup. Saltzman notes that all the Vi1 draws very little power, as much as a laptop. "All we need at front of house is literally a single power strip," he said. Saltzman points out that the Soundcraft Vi1's comprehensive control and configuration flexibility make it comfortable for both the in-house staff and visiting sound engineers to use. "It can be set up to 'feel' like a traditional analog console, or you can use its tremendous amount of processing and flexibility to take advantage of all of its digital features, like assigning input groups and saving cues on the console's cue/snapshot system." In fact, Saltzman discovered an unforeseen advantage of the Vi1 minutes before one particular performance. "Ten minutes before show time I accidentally pulled the AC power to the console at the end of sound check -- without bothering to save my settings. Luckily for me the Vi1 had backed everything up and recalled all my settings. The show went off without a hitch." 
|
